PRODUCTS
Product Name: Chitosan AzelateGrade: Cosmetic Grade……
Commodity Name: IscotrizinolChemical Name: Diethylh……
Product Name:EnsulizoleChemical Name: 2-Phenylbenzi……
Product Name: OctocryleneCAS No.: 6197-30-4Molecula……
Product Name: Microcrystalline Cellulose
CAS No.: 9004-34-6
Molecular Formula: (C12H20O10)n
Molecular Weight: 324.28
EINECS No.: 232-674-9
Chemical Structural Formula:
Physical & Chemical Properties:
|
Melting Point |
76-78 °C(Solv: acetone (67-64-1); chloroform (67-66-3)) |
|
Density |
1.5 g/cm3 (20℃) |
|
Refractive Index |
n20/D 1.504 |
|
Flash Point |
164℃ |
|
Solubility |
Practically insoluble in water, in acetone, in anhydrous ethanol, in toluene, in dilute acids and in a 50 g/L solution of sodium hydroxide |
|
Form |
Powder |
|
Color |
White to almost white |
|
pH Value |
5-7.5 (100g/l, H2O, 20℃)(slurry) |
|
Odor |
Odorless |
|
Water Solubility |
Insoluble |
|
Exposure Limit |
ACGIH: TWA 10 mg/m3 OSHA: TWA 15 mg/m3; TWA 5 mg/m3 NIOSH: TWA 10 mg/m3; TWA 5 mg/m3; TWA 1 mg/m3 |
|
Stability |
Stable. Combustible. Incompatible with strong oxidizing agents. |
Brief Introduction:
Microcrystalline cellulose (MCC) is the product of natural cellulose hydrolyzed by acid to the limit degree of polymerization. Its color is white or near white, odorless and tasteless. The particle size is generally about 2-80 μm. It has low density, high modulus; with the advantages of renewable, degradable, and wide sources, it can be used as a reinforcing agent for composite materials to improve the performance of materials.
Specifications of Microcrystalline Cellulose 101(USP43):
|
Test Items |
Specifications |
|
Identification |
Positive |
|
Degree of polymerization |
Not more than 350 |
|
pH Value |
5.0 ~ 7.5 |
|
Ether-soluble Matter |
Not more than 0.05% |
|
Water-soluble Matter |
Not more than 0.25% |
|
Conductivity |
Not more than 75 μS/cm |
|
Heavy Metals |
Not more than 10 ppm |
|
Residue on Ignition |
Not more than 0.1% |
|
Loss on Drying |
Not more than 7.0% |
|
Bulk Density |
0.32 g/mL ~ 0.42 g/mL |
|
Particle Size |
≥99% pass through 60 mesh sieve |
|
≥70% pass through 200 mesh sieve |
|
|
Total Plate Count |
Not more than 1000 CFU/g |
|
Total Yeasts & Moulds |
Not more than 100 CFU/g |
|
Escherichia coli |
Negative |
Specifications of Microcrystalline Cellulose 102(USP43):
|
Test Items |
Specifications |
|
Identification |
Positive |
|
pH Value |
5.0 ~ 7.5 |
|
Ether-soluble Matter |
Not more than 0.05% |
|
Water-soluble Matter |
Not more than 0.25% |
|
Conductivity |
Not more than 75 μS/cm |
|
Heavy Metals |
Not more than 10 ppm |
|
Residue on Ignition |
Not more than 0.1% |
|
Loss on Drying |
Not more than 7.0% |
|
Bulk Density |
0.32 g/mL ~ 0.42 g/mL |
|
Particle Size |
≥92% pass through 60 mesh sieve |
|
≤55% pass through 200 mesh sieve |
|
|
Total Plate Count |
Not more than 1000 CFU/g |
|
Total Yeasts & Moulds |
Not more than 100 CFU/g |
|
Escherichia coli |
Negative |
|
Salmonella |
Negative |
Application:
Microcrystalline cellulose is mainly used as non-caloric food additives, pharmaceutical excipients and dispersants, fillers for thin-layer chromatography and column chromatography, vehicles for dyes and pigments, reinforcing fillers for thermosetting resins and thermosetting laminates, coatings , emulsifier, can also be used in water-based paint and ceramic industry.
Packaging: 20kg/bag.
Storage Conditions: Preserved in unopened original bags in a cool dry place before using; kept away from direct sunlight, heat and moisture.
Shelf Life: 36 months if stored under above conditions.
Page location ：